COPYRIGHT@ 2022 FAR WELL EXTRACTION
About our CBD Oil Extractor
Our CBD Oil Extractor uses CO2 as solvent, which is mainly used for the extraction and separation of effective ingredients such as medicine, food, essence, perfume, etc. Our CBD oil extractor is composed of extraction kettles, separation kettles, distillation columns, CO2 pumps, etc. The extraction kettle is 0.5-1000l/32-50mpa solid-liquid dual-purpose, CO2 is recycled, and the containers, valves and pipelines in contact with the fluid are made of 1Cr18Ni9Ti stainless steel.
Our CBD oil extractor is used to extract CBD from hemp. Our CBD oil extractor can extract CBD from hemp with CO2 at room temperature (35 ~ 40 ℃), which can effectively prevent the oxidation and escape of heat sensitive substances. Therefore, the effective components of medicinal plants are maintained in the extract, and the substances with high boiling point, low volatility and easy pyrolysis can be extracted at a temperature far below its boiling point.
referenc CBD co2 extraction equipment
200L CBD co2 extraction equipment
Our 200L CBD co2 extraction equipment 420-40-200 can process 220kg hemp seeds per day.
The Advantages of our CBD Oil Extractor Supercritical CO2 Extraction
- Less damage to active ingredients. The critical temperature and critical pressure are low (TC = 31.1 ℃, PC = 7.38mpa), and the operating conditions are mild. It is suitable for the treatment of heat sensitive substances with high boiling point.
- Low solvent cost. CO2 can be regarded as a non-toxic and cheap organic solvent similar to water.
- Effectively prevent product oxidation. CO2 is stable, non-toxic, non-combustible, safe, does not pollute the environment, and can avoid the oxidation of products.
- Safety and healthy. The CO2 extraction does not contain nitrate and harmful heavy metals, and there is no residue of harmful solvents.
CBD Oil Extractor
No organic solvent is used in the whole process, so the extract has no residual solvent substances, so as to prevent the existence of harmful substances to human body and environmental pollution in the extraction process, and ensure 100% pure nature;
Extraction and separation are combined into one. When the CO2 fluid of saturated dissolved matter enters the separator, due to the decrease of pressure or the change of temperature, CO2 and extract quickly become two phases (gas-liquid separation) and immediately separate, which not only has high extraction efficiency, but also has less energy consumption, improves the production efficiency and reduces the cost.
Show case of our CBD Oil Extractor
Our supercritical co2 extraction machine uses CO2 as solvent. CO2 solvent is mainly used for the extraction and separation of effective ingredients such as medicine, food, essence, perfume, etc. The supercritical co2 extraction machine is composed of extraction kettle, separation kettle, distillation column, CO2 pump, etc. The extraction kettle is 0.5-1000L/32-50MPa solid-liquid dual-purpose, the CO2 is recycled, and the containers, valves and pipelines in contact with the fluid are made of 1Cr18Ni9Ti stainless steel.
The raw materials are loaded into the extraction kettle.
The CO2 gas is condensed into liquid through the heat exchanger, the pressure is raised to the pressure required by the process (higher than the critical pressure of CO2) by the booster pump, and the temperature is adjusted to make it become supercritical CO2 fluid.
CO2 fluid enters from the bottom of extraction kettle, fully contacts with the extracted material and selectively dissolves the required chemical components.
The high-pressure CO2 fluid containing dissolved extract is depressurized below the critical pressure of CO2 through pressure reducing valve and enters the separation kettle.
The solubility of CO2 decreases sharply and the solute is precipitated, which is automatically separated into solute and CO2 gas. The product is regularly discharged from the bottom of the separation kettles, and the CO2 gas is condensed into CO2 liquid through the heat exchanger for recycling.
Professional CBD Oil Extractor Manufacturer
Our company is located in Hai’an City, Nantong City, Jiangsu Province. Superior geographical location, convenient transportation and developed economy.
Our company is a professional design and manufacturer of CO2 supercritical extraction device, large CO2 supercritical extraction device and industrial CO2 supercritical extraction device.
The CO2 supercritical extraction device produced by our company has been highly praised by the majority of users for its excellent performance and quality. Products are all over the country and exported to the United States, Europe, Southeast Asia and other parts of the world.